Great Planes ElectriFly Edge 540T ARF
Tower Hobbies
Great Planes® ElectriFly® Edge 540T
E-Performance Series 3D EP ARF
Almost-Ready-to-Fly 50” Class EP Aerobat

Features
Great Planes ElectriFly Edge 540T ARF
This airplane is designed for unlimited performance with the RimFire 42-50-800 Outrunner brushless motor. The motor box is preinstalled with blind nuts, providing perfect spacing for the spinner backplate without measuring.
Great Planes ElectriFly Edge 540T ARF
The wing tube joiner is made of ultra-modern carbon fiber material. It aligns the wing automatically and allows for easy transport to and from the field.
Great Planes ElectriFly Edge 540T ARF
Fiberglass gives the cowl a quality appearance — and the cowl ring and magnets are pre-glued and factory-aligned so the motor can be bolted on without gluing or measuring.
Great Planes ElectriFly Edge 540T ARF
Double-beveled control surfaces allow for precision tracking with minimum throws. Maxing out the throws delivers all the agility needed for executing extreme 3D maneuvers.
The pinnacle in a mid-sized electric aerobat.


Click the picture to view video


The 50" class is an exciting new category of electric aircraft, and the Edge 540T is sure to be a standout! Slightly smaller than traditional .40 glow models, 50" class planes typically boast many sophisticated features that discriminating pilots look for in an aerobatic ARF — and until now virtually all 50" class machines were produced by exclusive manufacturers. That’s all about to change with the Edge 540T, a spirited performer that takes full advantage of advanced engineering and pre-fabrication to instantly become a bold, new way to fly!
Box to flight in just 6-8 hours!
  • No cutting corners here! Only the finest materials — carbon fiber, hand-selected woods and lightweight fiberglass — have been used.
 
  • Airfoiled control surfaces, pre-hinged ailerons and rudder and a preinstalled motor box with cowl ring are just some of the examples of the attention to detail found on this Edge.
Expertly Covered in Top Flite MonoKote!

Great Planes ElectriFly Edge 540T ARF
The self-aligning wheel pants and landing gear legs are made of lightweight fiberglass. Low profile axles eliminate bulky bolts and give the wheel pants a super-clean look

For even more style and lighter weight, carbon fiber wheel pants (LXVJV8) and landing gear (LXVJV7) are available separately! Great Planes ElectriFly Edge 540T carbon fiber wheel pants and landing gear
Specifications
Wingspan: 49.5 in (1260 mm)
Wing Area: 490 in2 (31.6 dm2)
Weight: 3.25-3.5 lb (1470-1590 g)
Wing Loading: 15-16 oz/ft2 (46-49 g/dm2)
Length: 48 in (1220 mm)
Requires: 4-5 channel radio w/4 micro servos, receiver, 45A ESC, Outrunner brushless motor, 14.8V 2100mAh LiPo battery
Edge 540T E-Performance Series 3D EP ARF 50
       LXVEL2 ONLY       Buy Now Stock Status:
Add to
Wish List
Tech Notes Primary Accessories Radio & Engine Equipment Building & Field Equipment Optional Accessories
Carbon Fiber Wheel Pants
       LXVJV8 ONLY       Buy Now Stock Status:
Add to
Wish List
Tech Notes
Carbon Fiber Landing Gear
       LXVJV7 ONLY       Buy Now Stock Status:

Add to
Wish List
Tech Notes
 

Prices shown were current at time of ad production and are subject to change.
Tower Hobbies Home Page Home
Tower Hobbies Shopping Cart Shopping
Cart
Tower Hobbies Your Account Your
Account
Tower Hobbies E-mail Newsletter Sign-up E-mail Newsletter
Tower Hobbies Wish ListWish
List

Copyright © 2008 - Tower Hobbies
All rights reserved. Do not duplicate or redistribute in any form.